Flange Aligning Tools

Titan flange alignment tools are a simple and, effective way to align any flange for any alignment job. All the operator has to do is to slide the thin end of the pin through the holes in the two flanges that most closely line up and turn the pin with a wrench. As the pin spins the holes will begin to line up. The tool's tapered shaft has a patented end. This detail eliminates the need for hammering, prying and pushing when attempting to line up flange bolt holes. If necessary you can use a second pin on the opposite side of the flange to get the flange to completely line up. At this point all the operator has to do is slide the bolts through the aligned bolt holes and tighten them up to the correct torque rating.

Below is a chart listing all the different sizes available in the standard lengths and the "Extra Long" models as well.


 

TITANFlangeAligningTool from Proline Pipe Equipment inc. on Vimeo.



Flange Aligning Tool Sets are available In pairs of three, four, five and 6 sizes. All sets come in a custom foam fitted tool box. The tool box is a handy way to keep all the pins together and to keep them from being lost or missed placed, and from being damaged sitting in the bottom of an old tool box.
  1. FTS24 Includes three pairs of pins: FT02, FT03, & FT04
  2. FTS26 Includes four pairs of pins: FT02, FT03, FT04, & FT06
  3. FTS28 Includes five pairs of pins: FT02, FT03, FT04, FT06, & FT08
  4. FTS212 Includes six pairs of pins: FT02, FT03, FT04, FT06, FT08, & FT1012

There are also "Extra Long" Flange Aligning Pin sets available

  1. FTS24L Includes three pairs of pins: FT02L, FT03L, & FT04L
  2. FTS26L Includes four pairs of pins: FT02L, FT03L, FT04L, & FT06L
  3. FTS28L Includes five pairs of pins: FT02L, FT03L, FT04L, FT06L, & FT08L
  4. FTS212L Includes six pairs of pins: FT02L, FT03L, FT04L, FT06L, FT08L, & FT1012L
 
 
Available Alignment Pin Sizes
 Catalog # Bolt Hole SIze Length Weight
 FT00 3/8" 2 1/8" 1 1/4 ozs.
FT0 1/2" 2 3/8" 2 1/4 ozs.
FT01 5/8" 2 3/4" 4 ozs.
FT02 3/4" 3 1/4" 7 ozs.
FT03 7/8" 3 1/2" 11 ozs.
FT04 1" 4" 1 lb.
FT06  1 1/8" 5" 1 1/2 lbs.
FT08  1 1/4" 5 1/2"  2 lbs.
 FT1012  1 3/8" 6 1/4"  2 7/8 lbs.
FT14  1 1/2" 6 1/2"  3 1/4 lbs.
FT16  1 5/8" 7 1/4"  4 1/8 lbs.
FT1820  1 3/4" 7 7/8"  4 3/4 lbs.
FT2426  2" 9"  6 5/8 lbs
FT30  2 1/8"  12"  10 3/8 lbs.
FT34  2 3/8"  13 1/4"  13 1/8 lbs.
FT3642  2 5/8" 14"  16 7/8 lbs.
Extral Long Sizes 
Catalog #  Bolt Hole SIze  Length  Weight
FT0L 1/2" 5 3/8"

10 ozs.

FT01L

5/8" 5 3/4"  12 ozs.
 FT02L  3/4" 6 1/4"  14 ozs.
 FT03L  7/8"  6 1/2"  1 1/8 lbs.
 FT04L  1"  7"  1 1/2 lbs.
 FT06L  1 1/8"  8"  2 1/4 lbs.
 FT08L  1 1/4"  8 1/2"  3 lbs.
 FT1012L  1 3/8"  9 1/4"  4 lbs.
 FT14L  1 1/2"  9 1/2"  4 1/2 lbs.
 FT16L  1 5/8"  10 1/4"  5 3/4 lbs.
 FT1820L  1 3/4"  10 7/8"  6 1/4 lbs.
 FT2426L  2"  12"  7 1/2 lbs.
 FT30L  2 1/8"  15"  13 lbs.
 FT34L  2 3/8"  16 1/4"  15 lbs.
 FT3642L  2 5/8"  17"  18 lbs.