'WS' Split Wall Sleeve
 

DESCRIPTIONS

 

Model WS Split Sleeves

Model WS Split Sleeves are used for installations where an existing pipe run needs to penetrate a wall yet to be constructed. During wall installation a split sleeve is welded around the existing pipe and positioned in the form to center the pipe. After installation a Link-Seal® Modular Seal is used to seal the annular space between split sleeve and pipe.

 

 

 

 

BENEFITS/FEATURES

 

 

WS Split Sleeves

  • Available from 2.07 (52.6mm) to 29.25 (74.3cm) Inside Diameters.
  • Standard wall thickness = Schedule 40 for up to 10"Ø
  • Standard wall thickness = 0.375" for 12"Ø and above.
  • Two 2" water stop collars for added structural stability.
  • Primed inside and out with Rust-O-Leum red primer #5268 or approved equivalent.
  • May be order to any length.
  • Special order diameters and schedule pipe available on request.

 

 

 

 

 

DIMENSIONAL DATA - PART NUMBERS

 


Model WS Split Sleeves
(12” length)

MODEL

I.D.

WS-2-15-S-12DWS

2.07

WS-2-1/2-27-S-12DWS

2.47

WS-3-21-S-12DWS

3.07

WS-3-1/2-22-S-12DWS

3.55

WS-4-23-S-12DWS

4.03

WS-5-25-S-12DWS

5.05

WS-6-28-S-12DWS

6.07

WS-8-32-S-12DWS

7.98

WS-10-36-S-12DWS

10.02

WS-12-37-S-12DWS

12.00

WS-14-37-S-12DWS

13.25

WS-16-37-S-12DWS

15.25

WS-18-37-S-12DWS

17.25

WS-20-37-S-12DWS

19.25

WS-22-37-S-12DWS

21.25

WS-24-37-S-12DWS

23.25

WS-26-37-S-12DWS

25.25

WS-28-37-S-12DWS

27.25

WS-30-37-S-12DWS

29.25

Note: Items made to order and may not be returned or exchanged.
Model WS Split Sleeves furnished Galvanized shall be galvanized after all welding, cutting and cleaning has been completed.
E Measurement must always be 1/8" for welding purposes.
Model Number DWS = Double Water-Stop Split Sleeve.

 

 

 

 

 

 

Installation Instructions