3M SCOTCHKOTE 323+

3M™ Scotchkote™ 323+ Liquid Epoxy Coating is a two-part coating system that can be used as a patch material, girthweld coating, and as a pipeline rehabilitation coating. 323+ Liquid Epoxy is used in a wide variety of other field applications where the corrosion protection and coating of metal is required. Comes in a SPRAY grade or a BRUSH grade.

Intended Uses

As a patch material.
As a girthweld coating.
As an internal lining.
As a stand alone coating for pipe rehabilitation.

No solvents needed. VOC as mixed 12 g/L.
High build, up to 45 mils/1150 microns in one application.
Applicable by cartridge, brush, roller, HSS or plural component spray.
Excellent adhesion.
100% solids.
Can be applied to a substrate as cold as 41°F/5°C.
Meets the requirements of AWWA C210.
Resistant to damage from acids and bases in pH range 2-14.
Resistant to hydrocarbons such as crude oil, motor oils and gasoline.
Certified to ANSI/NSF Standard 61, Drinking Water System Components.

100% solids.
Excellent adhesion.
High build, up to 45 mils, in one application.
Can be applied to a substrate as cold as 41°F/5°C.
Resistant to damage from acids and bases in pH range 2-14.
Resistant to hydrocarbons such as crude oil, motor oils and gasoline.
Applicable by cartridge, brush, roller, HSS or plural component spray.
2A:1B Volumetric Mix Ratio.

Product Data Sheet

MSDS Spray Grade