Spy In Plant Holiday Detector Model 115
Model 115 for FBE and Thin Film Coatings.
State-of-the-art holiday detector, in a sturdy case, with an easy-to-read, easy-to-use control panel and heavy-duty three wire power cord. A loud klaxon horn, that can be heard above normal plant noise, and a spring electrode wand with twenty feet of high voltage cable complete the system.
Output voltage is infinitely adjustable from 1 kilovolt to 5 kilovolts. Normal output voltage is direct current (DC), unless moisture is detected on the pipe. When moisture is detected, output voltage automatically switches to pulse type output voltage for optimum results.
INCLUDED WITH THE KIT
- In-Plant Holiday Detector
- Klaxon Horn
- 25 ft Spring/Brush Wand with Brush Kit
- Operating Instructions
Voltage Type: DC
Voltage Range (kV): 1-5 kV
Voltage Output Accuracy: ±5%
Coating Range (Min-Max): 4 – 50 mils
Pulse Repetition Rate: N/A
Operating Temperature: –40°F to 148°F
Internal Volt Meter: YES
Display Type: LCD
Holiday Indicator Type: Audible/Visual
Power Requirement: 120V AC (Optional 220V to 120V transformer)
Unit Weight w/ Battery Only: 9.2 lbs
Unit Dimensions (LxWxH): 12” x 13” x 8.5”
Domestic / International Standards Unit Complies With:
CE, NACE SP0490-2007,NACE SP0188-2006, TM0186-2002
Factory Warranty: 12 Month
Leading-Edge Circuitry: Almost eliminates maintenance and downtime.
Operates on Standard 120 VAC: No batteries are required.
Output Voltage: Automatically regulated for 2” to 60” pipe sizes.
Permanent or Semi-Permanent Installation: Extremely versatile for automatic or manual operation.
Internal Heater: Prevents moisture build-up when the unit is not in use.
Front of unit
- On/Off Toggle Switch with illuminated “On”
- Output Voltage LCD Display
- Light Detection Signal
- Sensitivity Knob
- Voltage Control Knob
- Connector for High Voltage Electrode Cable
Back of unit
- Ground Connection
- External Signal Plug for Optional Klaxon Horn or Auto Marker or 120 VAC Signal
- Standard 120 VAC