For a wider Kilovolt Pulse range with a maximum output voltage to handle even thicker coatings the Model 135 has fully adjustable output voltage from 10,000 to 35,000 KV.
State-of-the-art holiday detector, in a sturdy case, with an easy-to-read, easy-to-use control panel and heavy-duty three wire power cord. A loud klaxon horn, that can be heard above normal plant noise, and a spring electrode wand with twenty feet of high voltage cable complete the system.
Almost eliminates maintenance and downtime.
OPERATES ON STANDARD 120 VAC
No batteries are required.
Automatically regulated for 2” to 60” pipe sizes.
PERMANENT OR SEMI-PERMANENT INSTALLATION
Extremely versatile for automatic or manual operation.
Prevents moisture build-up when the unit is not in use.
Front of unit
- On/Off Toggle Switch with illuminated “On”
- Output Voltage LCD Display
- Light Detection Signal
- Sensitivity Knob
- Voltage Control Knob
- Connector for High Voltage Electrode Cable
Back of unit
- Ground Connection
- External Signal Plug for Optional Klaxon Horn or Auto Marker or 120 VAC Signal
- Standard 120 VAC
Voltage Type: Pulse
Voltage Range (kV): 10-35 kV
Voltage Output Accuracy: ±5%
Coating Range (Min-Max): 64-750 mils
Pulse Repetition Rate: 28 Hz
Operating Temperature: –40°F to 148°F
Internal Volt Meter: YES
Display Type: LCD
Holiday Indicator Type: Audible/Visual
Power Requirement: 120V AC (Optional 220V to 120V transformer)
Unit Weight w/ Battery Only: 9.7 lbs
Unit Dimensions (LxWxH): 12” x 13” x 8.5”
Domestic / International Standards Unit Complies With: CE, NACE SP0274-2011
Factory Warranty: 12 Month
INCLUDED WITH THE KIT
1 – In-Plant Holiday Detector
1 – Klaxon Horn
1 – 25 ft Spring/Brush Wand with Brush Kit
1 – Operating Instructions
If you purchase a SPY In Plant Holiday detector and have springs and brushes left over from your old Tinker & Razor or Elcometer portable detector, we have an adaptor that will fit the SPY wand so you don’t have to re-purchase the same springs and brushes a second time.
Adaptor: Tinker & Razor (P/N 13995) or Elcometer (P/N 13996) This will allow your older springs and brushes to fit your new SPY detector.