Description
Multi-Layers of Protection
• Force-cured liquid epoxy applied to steel, if required, for maximum corrosion protection
• Primary sleeve composed of high shear strength adhesive, a protective heat shrinkable backing, and a pre-attached
closure patch
• Sacrificial sleeve incorporated to protect the leading edge of the underlying primary sleeve during pull-through operation
• Epoxy overcoat applied at the leading and trailing ends of the joint coating to provide additional protection to the system during directional drilling
Superior Gouge and Abrasion Resistance
• Designed to mitigate the effect of forces associated with directional drilling
• Highly resistant to the effect of soil stresses and pipe movements
• Canusa’s ScarGuard®, WrapidShield XLE and HBE-DX products are provided as alternatives for added mechanical protection as an overcoat
Unique Adhesive Technology
• Allows for lower installation pre-heat temperatures and superior bonding to mainline coating
• Adhesive has been formulated to bond directly to the mainline coating; epoxy (if required) is applied to the steel only
• Lower pre-heat temperature means less time heating resulting in application time and cost
Widths / Lengths / Part Numbers
2 in. x 18 in. P/N:THRUSTBOREKIT6002X18
6 in. x 24 in. P/N:THRUSTBOREKIT6006X24
12 in. x 24 in. P/N:THRUSTBOREKIT6012X24
20 in. x 24 in. P/N:THRUSTBOREKIT6020X24
3 in. x 18 in. P/N:THRUSTBOREKIT6003X18
8 in. x 24 in. P/N:THRUSTBOREKIT6008X24
16 in. x 24 in. P/N:THRUSTBOREKIT6016X24
24 in. x 24 in. P/N:THRUSTBOREKIT6024X24
4 in. x 18 in. P/N:THRUSTBOREKIT6004X18
10 in. x 24 in. P/N:THRUSTBOREKIT6010X24
18 in. x 24 in. P/N:THRUSTBOREKIT6018X24