Ratchet Pipe Clamps

KC. ratchet drive outside line-up clamps have been the quality leader of the pipeline industry for many years. This line of KC clamps are of the screw type and are operated with a reversible ratchet wrench supplied with each clamp. Along with conventional design, these clamps have two features that make them superior to other clamps.


Contact Order Desk

Description

Features:

  • Screw type clamp with reversible ratchet.
  • Machined pads to fully contact O.D. of pipe.
  • Constructed of rolled, heavy rectangular bar stock for maximum strength when clamping out-of-round pipe.
  • High clamping, even pressure for maximum alignment.

 

KC. ratchet pipe clamps have been the leader in quality for the pipeline industry for many years. This line of KC ratchet lineup clamps are of the screw type and are operated with a reversible ratchet wrench supplied with each clamp. Along with conventional design, these clamps have two features that make them superior to other clamps.

First –  the inside diameter of the clamp is machined to fit the OD of the pipe being aligned. This machining operation produces a true bore with parallel pad faces, thus allowing each pad to fully contact the pipe surfaces to aid in accurate alignment of the joint.
Secondly – KC ratchet pipe clamps are extremely rigid, being constructed of heavy rectangular bar stock rolled the “hard” way; a design which produces maximum rigidity for the weight of the stock being used. This rigidity enables the clamp to resist springing and distortion when clamping out-of-round pipe.
These two qualities of accurate bore and high rigidity combine to produce the best possible joint alignment. The heart of the KC. Ratchet Drive Clamp, the screw, is made of alloy steel and is of sufficient diameter to withstand the stresses imposed by rigorous service.. The screw threads are of acme configuration precision cut for maximum strength and long periods of smooth operation. Clamp screws are protected from dirt contamination by heavy telescoping tubular guards, and grease zerks are provided in the steel nut assemblies to allow lubrication of the screw threads and bearing.

The KC Ratchet Pipe Clamp pads are made of rectangular steel that is laid flat to maximize pipe contact and minimize the distance between pressure areas. After the pads are welded in place on the rings, they are bored to proper size and contour to accurately fit the pipe to be clamped. This feature, in combination with the pipe clamp’s extreme rigidity and strong alloy screw, results in great clamping pressure. This pressure is evenly applied to the pipe insuring proper alignment before welding.

KC Ratchet Pipe Clamp Specifications

Pipe Size (in) Weight (lb) Weight (kg)
4 35 15.9
6 39 17.7
8 45 20.4
10 75 34.1
12 85 38.6
14 95 43.2
16 128 58.2
18 136 61.8
20 150 68.2
22 154 70.0
24 157 71.4
26 161 73.2
28 171 77.7
30 218 99.1
34 235 106.8
36 247 112.3
40 272 123.6
42 283 128.6
44 295 134.1
46 380 172.7
48 380 177.3
54 440 200.0
60 478 217.3