Spy Model 670 Portable Holiday Detector – Wet Sponge

Model 670 Portable Wet Sponge Holiday Detector is highly sensitive and accurate. Unit output is 67.5 Volts.

P/N: DETECTORWS670SPY


Contact Order Desk

Description

The Model 670 is lightweight and easy to handle. The electrode wand assembly is easily inserted into the unit and secured. Since the working voltage is quite low, a direct connection from the ground cable to the conductive metal under the coating must be made. A trailing ground wire will not suffice. Inspect more area faster. A revolutionary roller sponge electrode is an optional accessory for the Model 670. With this roller sponge electrode, coating inspections move along faster and with less operator fatigue. The Model 670 operates on a single 9 volt alkaline battery housed in the detector handle. These standard batteries are readily available at retail stores. Under normal conditions, the battery will have a long life. There is a minimal drain on the battery until a holiday is discovered. Unit output is 67 volts DC. This voltage makes this detector sensitive and accurate. A uniform coating of only one mil of paint or other non-conductive material is sufficient to repel this small current. If a pin-hole holiday is encountered, moisture from the sponge will seep in to create a free path for electrical flow, activating the signal horn. For coatings from 1 mil up to 10 mils thick, ordinary tap water can be used to wet the sponge. Above 10 mils, for coatings of 11 to 20 mils thickness, a non-sudsing wetting agent (such as Kodak Photo-flow R®) is recommended to increase the ability of the moisture to swiftly make its way through pin-holes in the thicker coating.

PRODUCT FEATURES

Fast and easy non-destructive inspection of paints, epoxy paints and coatings 1-20 mils:

  • NEW Ergonomic, Balanced, Lightweight Handheld Design.
  • NEW Rugged, Durable Construction
  • 67.5 Volt DC-Sensitive and Accurate
  • NEW Quick Change Battery Compartment
  • A NEW Wide Range of Quick Change Accessories
  • NEW Inspection Kit w/Carrying Case (Optional)

TECHNICAL SPECS

Voltage Type: DC
Voltage Range (kV): 67.5 Volts
Voltage Output Accuracy: ±5%
Coating Range (Min-Max): 1 – 20 mils
Operating Temperature: 33°F to 148°F
Holiday Indicator Type: Audible/Visual
Battery: 9 Volt Battery
Battery Life: Dependent Upon Load Applied (Number of Holidays)
Low Battery Indicator: Yes
Unit Weight Only: 0.9 lbs
Unit Weight With Battery Only: 1.8 lbs
Unit Dimensions (LxWxH): 9” x 4.5” x 3.25”
With Wand: 25” x 4.5” x 8”
Domestic/International Standards Unit Complies With: NACE SP0188-2006
Factory Warranty: 3 Month

PROLINE PIPE EQUIPMENT INC. IS A FACTORY AUTHORIZED REPAIR FACILITY