Description
For thicker coatings, the Model 125 has fully adjustable output voltage from 5 kilovolt to 25 kilovolts. For very demanding conditions, a sensitivity switch offers additional control.
PRODUCT FEATURES
State-of-the-art holiday detector, in a sturdy case, with an easy-to-read, easy-to-use control panel and heavy-duty three wire power cord. A loud klaxon horn, that can be heard above normal plant noise, and a spring electrode wand with twenty feet of high voltage cable complete the system.
LEADING-EDGE CIRCUITRY
Almost eliminates maintenance and downtime.
OPERATES ON STANDARD 120 VAC
No batteries are required.
OUTPUT VOLTAGE
Automatically regulated for 2” to 60” pipe sizes.
PERMANENT OR SEMI-PERMANENT INSTALLATION
Extremely versatile for automatic or manual operation.
INTERNAL HEATER
Prevents moisture build-up when the unit is not in use.
Front of unit
- On/Off Toggle Switch with illuminated “On”
- Output Voltage LCD Display
- Light Detection Signal
- Sensitivity Knob
- Voltage Control Knob
- Connector for High Voltage Electrode Cable
Back of unit
- Ground Connection
- External Signal Plug for Optional Klaxon Horn or Auto Marker or 120 VAC Signal
- Standard 120 VAC
TECHNICAL SPECS
Voltage Type: Pulse
Voltage Range (kV): 5-25 kV
Voltage Output Accuracy: ±5%
Coating Range (Min-Max): 16-400 mils
Pulse Repetition Rate: 28 Hz
Operating Temperature: –40°F to 148°F
Internal Volt Meter: YES
Display Type: LCD
Holiday Indicator Type: Audible/Visual
Power Requirement: 120V AC (Optional 220V to 120V transformer)
Unit Weight w/ Battery Only: 9.6 lbs
Unit Dimensions (LxWxH): 12” x 13” x 8.5”
Domestic / International Standards Unit Complies With: CE, NACE SP0274-2011
Factory Warranty: 12 Month
INCLUDED WITH THE KIT
1 – In-Plant Holiday Detector
1 – Klaxon Horn
1 – 25 ft Spring/Brush Wand with Brush Kit
1 – Operating Instructions
If you purchase a SPY In Plant Holiday detector and have springs and brushes left over from your old Tinker & Razor or Elcometer portable detector, we have an adaptor that will fit the SPY wand so you don’t have to re-purchase the same springs and brushes a second time.
Adaptor: Tinker & Razor (P/N 13995) or Elcometer (P/N 13996) This will allow your older springs and brushes to fit your new SPY detector.
PROLINE PIPE EQUIPMENT INC. IS A FACTORY AUTHORIZED REPAIR FACILITY
