Description
Output voltage is infinitely adjustable from 1 kilovolt to 5 kilovolts. Normal output voltage is direct current (DC), unless moisture is detected on the pipe. When moisture is detected, output voltage automatically switches to pulse type output voltage for optimum results.
PRODUCT FEATURES
State-of-the-art holiday detector, in a sturdy case, with an easy-to-read, easy-to-use control panel and heavy-duty three wire power cord. A loud klaxon horn, that can be heard above normal plant noise, and a spring electrode wand with twenty feet of high voltage cable complete the system.
LEADING-EDGE CIRCUITRY
Almost eliminates maintenance and downtime.
OPERATES ON STANDARD 120 VAC
No batteries are required.
OUTPUT VOLTAGE
Automatically regulated for 2” to 60” pipe sizes.
PERMANENT OR SEMI-PERMANENT INSTALLATION
Extremely versatile for automatic or manual operation.
INTERNAL HEATER
Prevents moisture build-up when the unit is not in use.
Front of unit
- On/Off Toggle Switch with illuminated “On”
- Output Voltage LCD Display
- Light Detection Signal
- Sensitivity Knob
- Voltage Control Knob
- Connector for High Voltage Electrode Cable
Back of unit
- Ground Connection
- External Signal Plug for Optional Klaxon Horn or Auto Marker or 120 VAC Signal
- Standard 120 VAC
TECHNICAL SPECS
Voltage Type: DC
Voltage Range (kV): 1-5 kV
Voltage Output Accuracy: ±5%
Coating Range (Min-Max): 4 – 50 mils
Pulse Repetition Rate: N/A
Operating Temperature: –40°F to 148°F
Internal Volt Meter: YES
Display Type: LCD
Holiday Indicator Type: Audible/Visual
Power Requirement: 120V AC (Optional 220V to 120V transformer)
Unit Weight w/ Battery Only: 9.2 lbs
Unit Dimensions (LxWxH): 12” x 13” x 8.5”
Domestic / International Standards Unit Complies With:
CE, NACE SP0490-2007,NACE SP0188-2006, TM0186-2002
Factory Warranty: 12 Month
INCLUDED WITH THE KIT
1 – In-Plant Holiday Detector
1 – Klaxon Horn
1 – 25 ft Spring/Brush Wand with Brush Kit
1 – Operating Instructions
If you purchase a SPY In Plant Holiday detector and have springs and brushes left over from your old Tinker & Razor or Elcometer portable detector, we have an adaptor that will fit the SPY wand so you don’t have to re-purchase the same springs and brushes a second time.
Adaptor: Tinker & Razor (P/N 13995) or Elcometer (P/N 13996) This will allow your older springs and brushes to fit your new SPY detector.